 |
PDF下載 |
說明model and size code 產品型號 及 尺寸代碼 | VDC 額定直流電壓 | Nominal capacitance標稱電容量 | Size尺寸（mm） | ||||||
電容量溫度系數組別 | Dmax | Tmax | F | d ±0.05 | |||||
CH(NP0) | UJ | SL | |||||||
CC1-05 | 50V | 0P5～560 | 0P5～820 | 180～221 | 5.5 | 4.0 | 5.0 | 0.45 | |
CC1-06 | 620～101 | 101 | 221～271 | 6.5 | 4.0 | 5.0 | |||
CC1-08 | 111～151 | 121～151 | 301～431 | 8.0 | 4.0 | 5.0 | |||
CC1-10 | 181～271 | 181～331 | 471～681 | 10.0 | 4.0 | 5.0 | |||
CC1-12 | 301～391 | 751～102 | 12.5 | 4.0 | 5.0 | ||||
CC1-05 | 500V | 0P5～330 | 0P5～390 | 180～121 | 5.5 | 4.0 | 5.0 | 0.45 0.55 | |
CC1-06 | 360～560 | 400～680 | 121～151 | 6.5 | 4.0 | 5.0 | |||
CC1-08 | 820～101 | 181～271 | 8.0 | 4.0 | 5.0 | ||||
CC1-10 | 121～151 | 331～471 | 10.0 | 4.0 | 5.0 | ||||
CC1-12 | 181～221 | 561 | 12.5 | 4.0 | 5.0 | ||||
CC81-06 | 1KV | 0P5～220 | 0P5～330 | 180～101 | 6.5 | 4.0 | 5.0 7.5 10.0 | 0.45 0.55 | |
CC81-08 | 270 | 390～680 | 151～181 | 8.0 | 4.0 | ||||
CC81-10 | 330～680 | 820～151 | 221471 | 10.0 | 4.0 | ||||
CC81-12 | 820～271 | 181～271 | 561 | 12.5 | 4.0 | ||||
CC81-06 | 2KV | 0P5～270 | 0P5～330 | 4R0～680 | 6.5 | 5.0 | 5.0 7.5 10.0 | 0.45 0.55 | |
CC81-08 | 300～680 | 470～560 | 820～101 | 8.0 | 5.0 | ||||
CC81-10 | 820～101 | 680～101 | 121～271 | 10.0 | 5.0 | ||||
CC81-06 | 3KV | 2P0～120 | 2P0～220 | 2P0～220 | 6.5 | 6.0 | 7.5 10.0 | 0.55 | |
CC81-08 | 150～220 | 250～300 | 250～330 | 8.0 | 6.0 | ||||
CC81-10 | 240～330 | 330～390 | 390～560 | 10.0 | 6.0 | ||||
CC81-12 | 470 | 680～820 | 12.5 | 6.0 | |||||
CC81-14 | 101～221 | 14.0 | 6.0 | ||||||
CC81-16 | 101 | 16.0 | 6.0 | ||||||
CC81-06 | 6KV | 2P0～120 | 2P0～150 | 2P0～150 | 6.5 | 7.0 | 7.5 10.0 | 0.55 | |
CC81-08 | 150～220 | 180～220 | 180～270 | 8.0 | 7.0 | ||||
CC81-10 | 240～330 | 240～270 | 300～390 | 10.0 | 7.0 | ||||
CC81-12 | 470 | 470～680 | 12.5 | 7.0 | |||||
CC81-14 | 820～151 | 14.0 | 7.0 | ||||||
CC81-16 | 101 | 16.0 | 7.0 | ||||||
model and size code 產品型號及尺寸代碼 | VDC 額定直流電壓 | Nominal capacitance標稱電容量 | size尺寸（mm） | |||||||
Temperature coefficient of capacitance group電容量溫度系數組別 | Dmax | Tmax | F | d ±0.1 | ||||||
2B/2X | LR | BN | 2E | 2F | ||||||
CT1-05 | 50V | 101～152 | / | / | 222～502 | 102～103 | 5.5 | 4.0 | 5.0 | 0.45 |
CT1-06 | 182～332 | / | / | 822～103 | 103 | 6.5 | 4.0 | 5.0 | ||
CT1-08 | 392～562 | / | / | 103～153 | 8.0 | 4.0 | 5.0 | |||
CT1-10 | 682 | / | / | 153～223 | 10.0 | 4.0 | 5.0 | |||
CT1-12 | 822～103 | / | / | 12.5 | 4.0 | 5.0 | ||||
CT1-05 | 500V | 101～561 | / | / | 102～222 | 102～332 | 5.5 | 4.0 | 5.0 | 0.45 0.55 |
CT1-06 | 681～122 | / | / | 272～392 | 392～562 | 6.5 | 4.0 | 5.0 | ||
CT1-08 | 152～272 | / | / | 472～682 | 682 | 8.0 | 4.0 | 5.0 | ||
CT1-10 | 332～392 | / | / | 103～123 | 822～103 | 10.0 | 4.0 | 5.0 | ||
CT1-12 | 472～682 | / | / | 123～223 | 12.5 | 4.0 | 5.0 | |||
CT1-14 | 822～103 | / | / | 333 | 14.0 | 4.0 | 5.0 | |||
CT81-06 | 1KV | 101～681 | 101～471 | 101～102 | 821～222 | 102～272 | 6.5 | 4.0 | 5.0 | 0.45 |
CT81-08 | 821～152 | 561～102 | 102～182 | 272～392 | 332～682 | 8.0 | 4.0 | |||
CT81-10 | 182～222 | 122～182 | 222～332 | 472～682 | 103 | 10.0 | 4.0 | |||
CT81-12 | 272～472 | 22～2272 | 392～472 | 822～103 | 103 | 12.5 | 4.0 | 7.5 10.0 | 0.55 | |
CT81-14 | 562 | 332～392 | 562 | 223 | 14.0 | 4.0 | ||||
CT81-16 | 682 | 472 | 682 | 16.0 | 4.0 | |||||
CT81-18 | 103 | 103 | 333473 | 18.0 | 4.0 | |||||
CT81-06 | 2KV | 10～1471 | 151～331 | 101～561 | 102～122 | 102～222 | 6.5 | 5.0 | 5.0 | 0.45 |
CT81-08 | 561～102 | 391～561 | 681～102 | 152～222 | 272～332 | 8.0 | 5.0 | |||
CT81-10 | 122～181 | 681～102 | 122～152 | 272～392 | 392～562 | 10.0 | 5.0 | |||
CT81-12 | 222～272 | 122～152 | 182～272 | 472～682 | 682～103 | 12.5 | 5.0 | 7.5 10.0 | 0.55 | |
CT81-14 | 332～392 | 222 | 332 | 103 | 103 | 14.0 | 5.0 | |||
CT81-16 | 472 | 272～332 | 392～472 | 153 | 16.0 | 5.0 | ||||
CT81-18 | 562～682 | 392 | 562～682 | 223 | 18.0 | 5.0 | ||||
CT81-06 | 3KV | 101～331 | 101～331 | 102 | 102～152 | 6.5 | 6.0 | 7.5 10.0 | 0.55 | |
CT81-08 | 391～561 | 151～331 | 391～471 | 122～152 | 182～222 | 8.0 | 6.0 | |||
CT81-10 | 681～102 | 391～681 | 681～122 | 182～272 | 272～392 | 10.0 | 6.0 | |||
CT81-12 | 122～182 | 821～102 | 152～182 | 332～472 | 472～682 | 12.5 | 6.0 | |||
CT81-14 | 222 | 222～272 | 562～682 | 103 | 14.0 | 6.0 | ||||
CT81-06 | 6KV | 101～271 | / | 101～221 | 471～561 | 102 | 6.5 | 7.0 | 7.5 10.0 | 0.55 |
CT81-08 | 331～391 | / | 331～391 | 681～102 | 152～182 | 8.0 | 7.0 | |||
CT81-10 | 471～680 | / | 471～681 | 122～182 | 222～272 | 10.0 | 7.0 | |||
CT81-12 | 821～122 | / | 102 | 222～332 | 332～472 | 12.5 | 7.0 | |||
CT81-14 | 152～182 | / | 392 | 562～682 | 14.0 | 7.0 | ||||
model and size code 產品型號 及 尺寸代碼 | VDC額定直流電壓 | Temperature characteristics溫度特性 | SIZE尺寸（mm） | |||||
3B | 3E | 3F | Dmax | Tmax | F | d ±0.1 | ||
Nominal capacitance標稱電容量 | ||||||||
CS1-05 | 10V 16V 25V 50V | 628～103 | 103～333 | 103～473 | 5.5 | 4.0 | 5.0 | 0.45 |
CS1-06 | 123～223 | 303～473 | 563～104 | 6.5 | 4.0 | 5.0 | ||
CS1-08 | 333～503 | 473～104 | 104～154 | 8.0 | 4.0 | 5.0 | ||
CS1-10 | 563～683 | 823～104 | 184～224 | 10.0 | 4.0 | 5.0 | ||
CS1-12 | 823～104 | 12.5 | 4.0 | 5.0 | ||||
CS1-05 | 100V | 103～223 | 5.5 | 4.0 | 5.0 | 0.45 | ||
CS1-06 | 103～153 | 223～333 | 333～473 | 6.5 | 4.0 | 5.0 | ||
CS1-08 | 203～223 | 473～683 | 563～104 | 8.0 | 4.0 | 5.0 | ||
CS1-10 | 333～393 | 823～104 | 823～104 | 10.0 | 4.0 | 5.0 | ||
CS1-12 | 473～683 | 224 | 12.5 | 4.0 | 5.0 | |||
N0. | item項目
| specitication試驗結果（規格值）
| Test method and test condition 試驗條件 | ||||||||||
7 | Temperature characteristic 溫度特性
| NP0:（0±60 ppm/℃） SL：（+140～-1000ppm/℃） | Temperature measurements in the following phase capacity value: (for T3 in base) 在下列階段溫度測量容量值：基準T3 step步驟 Temperature溫度T120±2℃T2-25±2℃T320±2℃T485±2℃T520±2℃
| ||||||||||
8 | Robustness of terminations引出端強度
| tensile拉力
| S(mm)tensile拉力 0.35＜S≤0.5>5N0.5＜S≤0.8>10 N
| Fixed capacitor’body and Lead wire , lower lead wire.固定電容器本體和引腳，向下拉動引腳。
| |||||||||
Bending 彎曲
| Lead wire shall not cut off. Capacitor shall not be broken. No visible damage.引線無斷裂，本體無損傷，無可見損傷
| Two times in a row in each direction bending, tension F=5N在每個方向上連續進行兩次彎曲，拉力F=5N
| |||||||||||
9 | Resistance to soldering heat 耐焊接熱
| Appearancecheck 外觀檢查 | no visible damage，mark clear無可見損傷，標志清晰
| Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 不預先干燥，采用焊槽法，引線插入t=1.6mm，孔徑Ф=1.0mm電路板中,離錫面2mm Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5SMeasurement of recovery for 24 ± 2 hours under standard conditions在標況下恢復24±2小時測量
| |||||||||
Capacitance change 容量變化率
| NPO：±0.5％ SL：±1％ | ||||||||||||
Insulation resistance絕緣電阻 | IR≥10000MΩ | ||||||||||||
voltage proof 耐電壓 | No permanent break-down or flashover during the test period 無擊穿或飛弧
| ||||||||||||
N0. | item項目 | specitication試驗結果（規格值） | Test method and test condition 試驗條件 | ||||||||||
10 | solderability可焊性
| Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.包錫良好，在3秒內流合。
| Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 不預先干燥，采用焊槽法，引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S
| ||||||||||
11 | Rapid change of temperature (temperature cycling) 溫度快速變化 （溫度循環）
| No visible damage. mark clear. 無可見損傷，標志清晰
| Following step 1 loop, loop 5 times 以下步驟為1個循環，循環5次 step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes
| ||||||||||
12 | vibration振動
| No visible damage. mark clear. Capacitance: -20%≤ΔC/C≤+20% 無可見損傷，標志清晰 容量：-20%≤ΔC/C≤+20%
| frequency頻率： 10-55-10Hz 1minute amplitude of vibration振幅： 1.5mm direction方向: high and low，left and right, front and back side上下、左右、前后 time時間： 2hours condition狀態： sinusoidal wave正弦波振動 | ||||||||||
13 | shock沖擊
| No visible damage. mark clear. Capacitance: -20%≤ΔC/C≤+20% 外觀：標志清晰，本體無可見損傷 容量：-20%≤ΔC/C≤+20%
| condition條件： accelerated speed加速度：490m/s2 pulse duration脈沖持續時間：11ms direction方向：X Y Z number of times次數：3times | ||||||||||
N0. | Item 項目 | specitication試驗結果（規格值）
| Test method and test condition 試驗條件 | ||||||||||
14 | Damp heat steady state 穩態 濕熱
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％time時間500（+24/-0）Hours Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量
| |||||||||
capacitance change 容量變化率 | NP0：±2％max SL: ±3％max | ||||||||||||
Dissipation factor 損耗角正切
| Capacitance電容量QtgδC＜30pF≥200+10C1/QC ≥30pF≥500≤0.002
| ||||||||||||
Insulation resistance 絕緣電阻 | 5000MΩmin | ||||||||||||
15 | Damp heat steady state (charge)穩態濕熱 (負荷)
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％Voltage電壓額定電壓Rated voltagetime時間500（+24/-0）小時 Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量 | |||||||||
capacitance change 容量變化率 | NP0：±2％max SL: ±3％max | ||||||||||||
Dissipation factor 損耗角正切
| CAP.（C）QtgδC＜30pF≥200+10C1/QC ≥30pF≥500≤0.002
| ||||||||||||
Insulation resistance 絕緣電阻 | 5000MΩmin | ||||||||||||
16 | Endurance耐 久 性
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度125±2℃Voltage電壓1.5URTime時間1000(+48/-0)hours Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時內測量
| |||||||||
capacitance change 容量變化率 | NP0：±3％max SL: ±5％max | ||||||||||||
Dissipation factor 損耗角正切
| Capacitance靜電容量QtgδC＜30pF≥270+14C1/QC ≥30pF≥667≤0.0015
| ||||||||||||
Insulation resistance 絕緣電阻
| 5000MΩmin | ||||||||||||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition試驗條件 | |||
1 | Operating temperature rang 適用溫度范圍
| B、E、F、R | -25～+85℃，Includes capacitors heating包括電容器自身發熱 | This continuous use temperature range 可在此溫度范圍內連續使用
| ||
X | Includes capacitors heating -55～+125℃，包括電容器自身發熱 | |||||
2 | Appearance and size check 外觀和尺寸檢查
| Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements 元件表面清潔，無異物附著，標志清晰， 無可見損傷，尺寸符合規定要求 | Visually inspect the product appearance Dimension checked by calipers.目測檢查產品外觀 尺寸用游標卡尺檢查 | |||
3 | Capacitance 電容量 | Within the scope of the permitted deviation level在允許的偏差等級范圍內 | Testing temperature 溫度：25 ±3℃ Testing frequency 頻率：f=1KHz±20％ Testing voltage 電壓：1.0±0.1Vrms
| |||
4 | Dissipation factor 損耗角正切（tgδ） | 2B、2E、2X：tgδ≤2.5% LR、LB: tgδ≤0.5% 2F: tgδ≤5.0% | ||||
5 | Insulation resistance 絕緣電阻
| IR≥4000MΩ | Rated voltage額定電壓applied voltage測試電壓time時間current電流50、 500VUR60±5s≤0.05A1KV、2KV3KV、6KV500V60±5s≤0.05A
| |||
6 | voltage proof耐電壓
| Between lead wire端子之間
| No permanent break-down or flashover during the test period 無擊穿或飛弧
| Rated voltage額定電壓applied voltage測試電壓time時間current電流50、500V2.5UR1～5s≤0.05A1KV2UR1～5s≤0.05A2KV、3KV1.5UR+5001～5s≤0.05A6KV1.5UR1～5s≤0.05A
| ||
Body insulation端子與外殼之間
| Used by metal balls, voltage application DC1500V testing 1-5s, charge and discharge current ≤ 0.05A 使用金屬小球法，施加電壓DC1500V測試1-5s，充放電電流≤0.05A | |||||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 | ||
7 | Temperature characteristic 溫度特性
| 2B：（-10％～+10％） 2X：（-15％～+15％） LR：（-15％～+15％） 2E：（-56％～+22％） 2F: （-80％～+30％） LB：（-10％～+10％） | Temperature measurements in the following phase capacity value: (for T3 in base) 在下列階段溫度測量容量值：基準T3 Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2
| ||
8 | Robustness of terminations引出端強度
| tensile拉力
| S(mm)Tensile拉力0.35＜S≤0.5>5N0.5＜S≤0.8>10 N
| Fixed capacitor’body and Lead wire , lower lead wire. 固定電容器本體和引腳，向下拉動引腳。
| |
bending彎曲
| Lead wire shall not cut off. Capacitor shall not be broken. No visible damage. 引線不斷裂 電容器不被損傷 無可見損傷 | Two times in a row in each direction bending, tension F=5N 在每個方向上連續進行兩次彎曲，拉力F=5N
| |||
9 | 耐焊接熱 Resistance to soldering heat | Appearance check 外觀檢查 | no visible damage 無可見損傷，標志清晰
| Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 不預先干燥，采用焊槽法，引線插入t=1.6mm，孔徑Ф=1.0mm電路板中,離錫面2mm Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5SMeasurement of recovery for 24 ± 2 hours under standard conditions 在標況下恢復24±2小時測量
| |
Capacitance change 容量變化率
| 2B、2X :±10％max LR: ±15％max 2E、2F:±20％max BN: ±10％max | ||||
Insulation resistance絕緣電阻 | IR≥4000MΩ | ||||
voltage proof 耐電壓
| No permanent break-down or flashover during the test period 無擊穿或飛弧 | ||||
10 | Solderability 可焊性
| Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s. 包錫良好，在3秒內流合。
| Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 不預先干燥，采用焊槽法，引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S | ||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 |
11 | Rapid change of temperature (temperature cycling) 溫度快 速變化 （溫度循環）
| Appearance check No visible damage. mark clear. 外觀檢查： 無可見損傷，標志清晰
| Following step 1 loop, loop 5 times 以下步驟為1個循環，循環5次 step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃2X:125±2℃30minutes420±2℃3minutes
|
12 | Vibration 振動
| Appearance check and measurement: No visible damage. mark clear. Capacitance：-20%≤ΔC/C≤+20% 最后檢查、測量和要求： 無可見損傷，標志清晰 容量：-20%≤ΔC/C≤+20%
| frequency頻率： 10-55-10Hz 1minute amplitude of vibration振幅： 1.5mm direction方向: high and low，left and right, front and back side上下、左右、前后 time時間： 2hours condition狀態： sinusoidal wave正弦波振動 |
13 | Shock 沖擊
| Appearance check and measurement: No visible damage. mark clear. Capacitance：-20%≤ΔC/C≤+20% 最后檢查、測量和要求： 外觀：標志清晰，本體無可見損傷 容量：-20%≤ΔC/C≤+20%
| condition條件： accelerated speed加速度：490m/s2 pulse duration脈沖持續時間：11ms direction方向：X Y Z number of times次數：3times |
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 | |||
14 | Damp heat steady state 穩態 濕熱
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％Time時間500（+24/-0）Hours Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量
| ||
capacitance change 容量變化率 | 2B、2X：±10％max LR、LB：±15%max 2E：±20%max 2F：±30%max | |||||
Dissipation factor 損耗角正切
| 2B、2X：0.050max 2E、2F：0.070max LR、LB：0.070max | |||||
Insulation resistance絕緣電阻 | 2000MΩmin | |||||
15 | Damp heat steady state (charge)穩態濕熱 (負荷)
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％Voltage電壓Rated voltage額定電壓 Time時間500（+24/-0）小時 Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量 | ||
capacitance change 容量變化率 | 2B、2X：±10％max LR、LB：±15%max 2E：±20%max 2F：±30%max | |||||
Dissipation factor 損耗角正切
| 2B、2X：0.050max LR、2E、2F：0.070max BN：0.070max | |||||
Insulation resistance絕緣電阻 | 2000MΩmin | |||||
16 | 耐 久 性 Endurance | Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰
| temperature溫度125±2℃(2X)85±2℃(2B 2R 2E 2F BN)Voltage電壓 1.5倍額定電壓時間time1000（+48/-0）小時 Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時內測量
| ||
capacitance change 容量變化率 | 2B、2X、LR、2E：±20％max 2F： ±30%max LB：±20％max | |||||
Dissipation factor 損耗角正切
| 2B、2X：0.050max LR、2E、2F：0.070max LB：0.070max | |||||
Insulation resistance絕緣電阻 | 2000MΩmin | |||||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition試驗條件 | ||
1 | Operating temperature rang 適用溫度范圍 | Includes capacitors heating -25～+85℃，包括電容器自身發熱 | This continuous use temperature range 可在此溫度范圍內連續使用 | ||
2 | Appearance and size check 外觀和尺寸檢查
| Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements 元件表面清潔，無異物附著，標志清晰， 無可見損傷，尺寸符合規定要求 | Visually inspect the product appearance Dimension checked by calipers.目測檢查產品外觀 尺寸用游標卡尺檢查 | ||
3 | Capacitance 電容量 | Within the scope of the permitted deviation level在允許的偏差等級范圍內 | Testing temperature 溫度：25 ±3℃ Testing frequency 頻率：f=1KHz±20％ Testing voltage 電壓：0.1±0.05Vrms
| ||
4 | Dissipation factor 損耗角正切（tgδ） | 3B、3E、3F：（tgδ）≤5.0% | |||
5 | Insulation resistance 絕緣電阻
| 10V≤UR≤25V: IR≥100MΩ UR＞25V: IR≥1000MΩ | Rated voltage額定電壓applied voltage測試電壓time時間current電流10~100VUR60±5s≤0.05A
| ||
6 | voltage proof耐電壓
| Between lead wire端子之間
| No permanent break-down or flashover during the test period 無擊穿或飛弧
| Rated voltage額定電壓applied voltage測試電壓time時間current電流50V1.5UR1～5s≤0.05A100V1.5UR1～5s≤0.05A
| |
Body insulation端子與外殼之間
| Used by metal balls, voltage application DC150V testing 1-5s, charge and discharge current ≤ 0.05A使用金屬小球法，施加電壓DC150V測試1-5s，充放電電流≤0.05A | ||||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 | ||
7 | Temperature characteristic 溫度特性
| 3B：（-10％～+10％） 3E：（-56％～+22％） 3F：（-82％～+22％） | Temperature measurements in the following phase capacity value: (for T3 in base) 在下列階段溫度測量容量值：基準T3 Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2
| ||
8 | Robustness of terminations引出端強度
| tensile拉力
| S(mm)Tensile拉力0.35＜S≤0.5>5N0.5＜S≤0.8>10 N
| Fixed capacitor’body and Lead wire , lower lead wire. 固定電容器本體和引腳，向下拉動引腳。
| |
bending彎曲
| Lead wire shall not cut off. Capacitor shall not be broken. No visible damage. 引線不斷裂 電容器不被損壞 無可見損傷 | Two times in a row in each direction bending, tension F=5N 在每個方向上連續進行兩次彎曲，拉力F=5N
| |||
9 | Resistance to soldering heat 耐焊接熱
| Appearance check 外觀檢查 | no visible damage 無可見損傷，標志清晰 | Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 不預先干燥，采用焊槽法，引線插入t=1.6mm，孔徑Ф=1.0mm電路板中,離錫面2mm Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5SMeasurement of recovery for 24 ± 2 hours under standard conditions 在標況下恢復24±2小時測量
| |
Capacitance change 容量變化率
| 3B：±10％max 3E、3F、±20％max | ||||
Insulation resistance絕緣電阻 | IR≥100MΩ | ||||
voltage proof 耐電壓 | Within the scope of the initial specifications 在初期規格范圍之內 | ||||
10 | 可焊性 solderability | 包錫良好，在3秒內流合。 Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s. | 不預先干燥，采用焊槽法，引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm 焊錫溫度Solder bath temperature235±5℃焊錫時間Solder bath temperature2±0.5S | ||
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 |
11 | Rapid change of temperature 溫度快 速變化 （溫度循環）
| Appearance check No visible damage. mark clear. 外觀檢查： 無可見損傷，標志清晰
| Following step 1 loop, loop 5 times 以下步驟為1個循環，循環5次 step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes
|
12 | Vibration 振動
| Appearance check and measurement: No visible damage. mark clear. Capacitance：-20%≤ΔC/C≤+20% 最后檢查、測量和要求： 無可見損傷，標志清晰 容量：-20%≤ΔC/C≤+20%
| frequency頻率： 10-55-10Hz 1minute amplitude of vibration振幅： 1.5mm direction方向: high and low，left and right, front and back side上下、左右、前后 time時間： 2hours condition狀態： sinusoidal wave正弦波振動 |
13 | Shock 沖擊
| Appearance check and measurement: No visible damage. mark clear. Capacitance：-20%≤ΔC/C≤+20% 最后檢查、測量和要求： 外觀：標志清晰，本體無可見損傷 容量：-20%≤ΔC/C≤+20%
| condition條件： accelerated speed加速度：490m/s2 pulse duration脈沖持續時間：11ms direction方向：X Y Z number of times次數：3times |
N0. | Item 項目 | Specitication 試驗結果（規格值） | Test method and test condition 試驗條件 | |||
14 | Damp heat steady state 穩態 濕熱
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％Time時間500（+24/-0）Hours Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量
| ||
capacitance change 容量變化率 | 3B：±10％max 3E、3F：±20％max | |||||
Dissipation factor 損耗角正切 | 3B：0.07 max 3E、3F：0.1max | |||||
Insulation resistance絕緣電阻 | 100MΩmin | |||||
15 | Damp heat steady state (charge)穩態濕熱 (負荷)
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度40±2℃Relative humidity相對濕度90％～95％Voltage電壓Rated voltage額定電壓Time時間500（+24/-0）小時 Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時后測量
| ||
capacitance change 容量變化率 | 3B：±10％max 3E、3F：±20％max | |||||
Dissipation factor 損耗角正切
| 3B：0.07 max 3E、3F：0.1max | |||||
Insulation resistance絕緣電阻 | 100MΩmin | |||||
16 | Endurance耐 久 性
| Appearance check 外觀檢查 | No visible damage. mark clear. 無可見損傷，標志清晰 | temperature溫度85±2℃Voltage電壓1.5 times rated voltage 1.5倍額定電壓Time時間1000（+48/-0）hurs Measurement of recovery for 24 ± 2 hours under standard conditions 標況下恢復24±2小時內測量
| ||
capacitance change 容量變化率 | 3B、3E、3F：±20％max | |||||
Dissipation factor 損耗角正切 | 3B：0.07max 3E、3F：0.1max | |||||
Insulation resistance絕緣電阻 | 100MΩmin | |||||
中文